|
|
|
Replace your original bleeder screw with the patented Speed Bleeder™ and you are ready to start. All you do is open the Speed Bleeder™ 1/4 to 1/2 turn and pump your brake lever continuously. The patented spring-loaded check ball design allows the old fluid and air to be pushed out, but closes between pumps, preventing the old fluid or air from getting back into the system. When all the old fluid is purged from the system, tighten the Speed Bleeder™ and you are done!
7mm size for 2007 and older KLR 650s only!
Don't for get to order your new brake fluid!
|
|