The
Speed Bleeder™ simplifies the troublesome job of bleeding your brake
system and makes bleeding your brakes a one person task. Replace your
original bleeder screw with the patented Speed Bleeder™ and you are ready to
start. All you do is open the Speed Bleeder™ 1/4 to 1/2 turn and pump your brake
lever continuously. The patented spring-loaded check ball design allows
the old fluid and air to be pushed out, but closes between pumps, preventing the
old fluid or air from getting back into the system. When all the old fluid
is purged from the system, tighten the Speed Bleeder™ and you are done!
Speed Bleeders are available for stock or aftermarket calipers.
ITEM #
DESCRIPTION
RETAIL
QTY
80-00000-007
SPEED BLEEDER™ - 7MM
$14.95
PAIR
80-00000-008
SPEED BLEEDER™ - 8MM
$14.95
PAIR
80-00000-010
SPEED BLEEDER™ - 10MM
$14.95
PAIR
83-00123-051
MOTUL™ BRAKE FLUID DOT 5.1
$7.95
EACH
Don't for get to order your new brake
fluid!
Motorcycle
Application Chart
Year
and Model
Thread
Size
Yamaha
Honda
M8
X 1.25
front and rear
Suzuki
Kawasaki
M7
X 1.0
front and rear
BMW
before 1996
M10
X 1.0
front and rear
BMW
1996 and after
M10
X 1.0 front
M6 X 1.0 rear
Suzuki DRZ 400
M8
X 1.25
KTM LC4
M10
X 1.0
Monday-Friday
11:00AM-6:00PM
Pacific Standard Time
DUAL STAR……The
original
Motorcycle Adventure Outfitters™.
Providing the highest quality and most innovative Serious Trail
And Road™
accessories, clothing and equipment to the motorcycle enthusiast around the
world!
Send mail to the WEBMASTER with questions or comments about the operation of
this web site.
DUAL STAR, DUAL STAR INTERNATIONAL, Serious Trail And Road,
Motorcycle Adventure Outfitters,
AdventureGear, Adventure Gear,
Tarmac To Timberline, TrickStar, TrailStar, TrailMax, TrailTech, Trail
Tested, S.T.A.R. Tech, GO-N-RIDE, 1-800-GO-N-RIDE and 1-866-GO-N-RIDE are
trademarks of DUAL STAR INTERNATIONAL
All other names and logos are the trademarks of their respective owners.
Prices, specifications and product availability subject to change without
notice.
The
Speed Bleeder™ simplifies the troublesome job of bleeding your brake
system and makes bleeding your brakes a one person task. Replace your
original bleeder screw with the patented Speed Bleeder™ and you are ready to
start. All you do is open the Speed Bleeder™ 1/4 to 1/2 turn and pump your brake
lever continuously. The patented spring-loaded check ball design allows
the old fluid and air to be pushed out, but closes between pumps, preventing the
old fluid or air from getting back into the system. When all the old fluid
is purged from the system, tighten the Speed Bleeder™ and you are done!
Speed Bleeders are available for stock or aftermarket calipers. 
